Skip to main content
Blog
Back to Blog

Workspace Studio follow-up reminders for founder outreach

Google Workspace Studio gained a "Wait until" step on November 10, 2026: a flow can now pause for up to 14 days and then carry on. That sounds like an email sequence, but Studio still has no step that checks whether someone replied, and a flow cannot start from an email you sent. This guide is for a founder sending a few dozen personal emails a week (interview requests, design-partner asks, pilot offers) from a Google Workspace account. It shows three small flows built only from steps Google documents: one logs replies to a sheet, one tells you each morning who is due a follow-up, and one uses Wait until for "check back next week" replies. You still write and send each follow-up yourself. It is useful without a Soloop account.

The short answer

Keep one Google Sheet with a row per person you emailed and a Status column. Flow 1 watches incoming mail with your outreach subject line and marks the matching row "Replied". Flow 2 runs each weekday morning, reads the sheet and creates a Google Tasks reminder for every row still marked "Sent" after four days. Flow 3 catches replies such as "try me next week", waits until Monday morning with the new Wait until step and leaves you a reminder.

Do not let a flow send the follow-up for you. Studio's send step starts a new email rather than replying in the thread, the sender shows as your flow's name, and the lists Gemini builds can be wrong. A reminder that is wrong costs you a minute; a follow-up sent to someone who already replied costs you the conversation.

What Google launched

Workspace Studio is Google's no-code tool for automating Gmail, Sheets, Drive, Chat and other Workspace apps with flows: a starter that begins a run, then steps that act. On November 10, 2026, Google added Wait until, which pauses a run "at any point in its execution, including inside conditional branches (Check if) and loops (Repeat for each)". Google said it would be visible in all domains within one to three days from November 9.

You can wait until a day and time next week, until a specific date and time, or for a set number of hours, minutes and seconds. A run can wait 14 days at most. There is no admin setting for the step itself; your administrator still controls whether you can use Studio and Gemini.

Wait until

Three modes (specific day next week, specific day and time, after a set duration), up to 14 days in total; available on Business Starter, Standard and Plus, Enterprise Standard and Plus and education editions; "There is no admin control for this feature."

Google Workspace Updates, November 10, 2026
Availability

Workspace Studio is generally available with all Business and Enterprise Workspace plans and can only access data the person running the flow can access.

Google Workspace Studio FAQ

What Studio can and cannot do for follow-ups

Follow-up jobs and what Google's Workspace Studio documentation says about each
DimensionWhat Studio offersWhat it means for outreach
Pause and resumeWait until, up to 14 days; a specific date can be up to 13 days ahead.Good for "remind me Monday". Longer gaps need a task with a due date instead.
Know whether someone repliedNo step checks a thread for replies, and there is no Gmail search step.Record replies yourself: a Gmail-started flow writes them to a sheet.
Start from an email you sentThe Gmail starter, "When I get an email", fires on incoming mail only.Your sheet, not your Sent folder, is the list of people you contacted.
Send the follow-up"Send an email" composes a new email. "Send a reply" answers an existing thread but needs approval when someone outside your organization is included. Both show the sender as "[flow name] for [your name]".Send follow-ups by hand, in the original thread.
Decide or extract with AI"Ask Gemini" can return a list; "Decide" returns true or false for a "Check if" step.Useful for sorting, but check the output before acting on it.
Volume400 flow executions a month on most editions, a daily run limit with no published number, 25 flows per person.A flow that runs on every incoming email can use the month in days.

Set up the tracker sheet

Use one tab with a header row, because Studio's Sheets steps work by column name. Use the same short phrase at the start of every outreach subject line, such as "Quick question about" or "15 minutes on". Replies keep the subject with "Re:" in front, which is what Flow 1 filters on.

Download Markdown

Flow 1: log replies to the sheet

  1. Starter: When I get an email. Under "Subject has", enter your outreach phrase. Leave "Skip thread replies" off, because every reply you want is a thread reply.
  2. Step: Decide. Prompt: "Is this email an automatic reply, such as an out-of-office message or a delivery failure?"
  3. Step: Check if the decision is false; put the next step inside it.
  4. Step: Update rows. Choose the tracker tab, set the condition to the Email column matching the sender's email address variable, and set Status to Replied.
  5. Test run with a reply you send yourself from another address, then turn the flow on.

Flow 2: a morning list of who to follow up

  1. Starter: On a schedule, every weekday at 8:00 in your time zone.
  2. Step: Get sheet contents. Choose the tracker tab and the range A:F.
  3. Step: Ask Gemini, with the output set to a list. Prompt: "From this sheet, list the Name, Email and Subject of every row where the Due column says Due. One item per row. If no row says Due, return an empty list."
  4. Step: Repeat for each item in that list.
  5. Inside the loop, step: Create a task. Title: "Follow up: [item]". Date: today.
  6. When you send a follow-up, change the row's Status to Followed up so it stops appearing. One follow-up is usually enough; after a second silence, mark the row Closed.

Flow 3: "check back next week" replies with Wait until

This is where the new step helps: the flow starts from the reply itself, so it already has the sender and subject, and it only needs to hold that context for a few days.

  1. Starter: When I get an email, with the same "Subject has" phrase and "Skip thread replies" off.
  2. Step: Decide. Prompt: "Does the sender ask to be contacted again later, for example next week or after a date?"
  3. Step: Check if the decision is true; put the next steps inside it.
  4. Step: Wait until, Specific day next week, Monday at 9:00 in your time zone.
  5. Step: Create a task. Title: "Reply: [Email subject]". Details: the sender's email address. Date: today.

Stay within the run limit

Google's usage page gives a typical limit of 400 flow executions a month for Business Standard and Plus and Enterprise Standard and Plus, reset on the first of the month at midnight Pacific time. A separate daily run limit has no published number; once you reach it, runs fail until the next 24-hour cycle.

Illustrative arithmetic: a reply logger with no subject filter on an inbox that gets 30 emails a day would run about 30 × 30 = 900 times a month, more than twice the limit. Filtered to your outreach phrase, with 15 replies in a month, Flows 1 and 3 each run 15 times and Flow 2 runs on 22 weekdays: 15 + 15 + 22 = 52 runs, about 13% of 400.

Worked example

Illustrative, not real data. On Monday, November 23, a founder emails 30 people with subjects starting "15 minutes on" and adds them to the sheet as Sent. By Friday, 9 have replied and Flow 1 marks them; one out-of-office reply is skipped by the Decide step. On Friday morning, four days after sending, the Due column flags the other 21 rows and Flow 2 creates 21 tasks.

One reply says "busy this week, ping me Monday". Flow 3 waits until Monday, November 30, at 9:00 and creates a task. The founder sends 21 short follow-ups in the original threads and changes those rows to Followed up.

Before you turn the flows on

  • You are on a Google Workspace account with Studio and Gemini enabled by your administrator.
  • Every outreach subject starts with the same phrase, and the Gmail starters filter on it.
  • "Skip thread replies" is off in Flows 1 and 3.
  • The tracker has a header row and the Due formula fills down every row.
  • Each flow was test-run with your own addresses; Google says a test run takes real actions.
  • No flow sends email to prospects; Flows 2 and 3 only create tasks.
  • You checked the Activity tab after the first day, including runs that are waiting.

Where Soloop fits

Soloop does not build or run Workspace Studio flows. If the sheet-and-reminders setup is enough for your volume, use it.

Soloop is for the outreach itself: according to the Soloop manual, it can research who to contact with sources, draft and send outreach through a connected Gmail account, publish X posts and prepare Google Ads search campaigns after setup and payment, with actions waiting for your approval by default.

Sources, limitations and refresh

Google's Workspace Updates posts of October 9 and November 10, 2026, the Workspace Studio help pages on starters and steps, getting started, creating a flow and limits, the Workspace usage-limits page and the Studio FAQ were read on November 20, 2026. The three flows are designs from those documented steps, not flows tested in a Soloop account; test each one with your own addresses first. Google does not document which variables "When a sheet changes" provides, whether a waiting run or each loop item counts toward executions, the daily run number or a Business Starter execution figure. Google's pages also disagree on personal accounts: one says they need Google Workspace Experiments, another that Studio does not support them. This guide is editorial guidance, not a statement from Google.

This guide will be reviewed by February 20, 2027, or sooner if Google adds a reply check or Gmail search step to Studio, or changes its limits.

Starters and steps

"When I get an email" starts on new incoming email, with filters including Subject has and Skip thread replies, and ignores events other flows create by default. "Send an email" composes a new email; "Send a reply" needs approval when the run includes people outside your organization; sent mail shows "[the name of your flow] for [your name]". Update rows, Get sheet contents, Ask Gemini, Decide, Check if, Repeat for each, Create a task and Wait until are documented steps.

Workspace Studio Help: Guide to Starters & Steps
Product capability

The Soloop manual describes research with sources, Gmail outreach through a connected account, X posting and Google Ads search campaigns after setup and payment; approval comes first by default. It does not build Workspace Studio flows.

Soloop product manual